Vintage Air Hose Kit

REFRIGERATION & HEAT

Refrigerant Line Size Identifier
SIZE I.D. DESCRIPTION
#6 5/16" Liquid hose: condenser to drier to evaporator
#8 13/32" Discharge hose: compressor to condenser
#10 1/2" Suction hose: evaporator to compressor
(All hose kits include crimp collars)

Barrier Type Refrigerant Hose
All Vintage Air line kits use barrier type refrigerant line for use with HFC-134a and R-12 refrigerants. Includes adequate hose length to connect complete system, all O-ring fittings and crimp ferrules. 134a systems include fittings with service ports. Includes: 6ft. of #6, 4ft. of #8, 5ft. of #10 barrier hose. Standard or extra length kits available.

PART #

 DESCRIPTION
  Standard Refrigeration Line Kit
31700-VUD Hose kit with drier 134a
31702-VUD Hose kit without drier 134a
31300-VUD Hose kit with drier R-12
31302-VUD Hose kit without drier R-12
31310-VUD Hose kit with drier (for flare compressor)
31312-VUD Hose kit without drier (for flare compressor)
31700-VBD Hose kit with drier (for 134a beadlock)
31703-VBD Hose kit without drier (for 134a beadlock)
31300-VBD Hose kit with drier (for R-12 beadlock)
31302-VBD Hose kit without drier (for R-12 beadlock)
  Bulkhead Plates
  These kits can be sued with our aluminum bulkhead plates show on page 52 at left and are not included with hose kits. Call your dealer for info.

Standard Heater Hose Kits
Choose straight or 90º firewall bulkhead fittings. Includes: 10 feet of 5/8" heater hose, 2 standard male O-ring 90 degree bulkhead fittings (or 2 standard straight bulkhead fittings), 2 female O-ring 90 degree fittings and 8 hose clamps.

PART #

 DESCRIPTION
31400-VUD 90º bulkhead fitting heater hose kit
31401-VUD Straight bulkhead fitting heater hose kit
SAFETY SWITCHES
PROTECT YOUR SYSTEM

We Recommend Safety Switches In All A/C Systems

Low Pressure Switch
Automatically cuts current to compressor clutch when system runs low on refrigerant.
PART # DESCRIPTION
24903-VUS Low Pressure switch

Switch Fitting
Pressure switch fitting. 3/8" female O-ring x 3/8" male O-ring w/ female switch installation fitting.

PART #

 DESCRIPTION
34098-VUG Switch fitting

Binary Switch
Combines high and low pressure functions into one switch. 30lb. low pressure cutoff, 380 lb. high pressure cutoff.

PART #

 DESCRIPTION
24677-VUS Binary switch

High Pressure Switch
Automatically cuts current to compressor clutch when system has excessive head pressure.

PART #

 DESCRIPTION
24674-VUS High Pressure switch

Trinary Switch
Combines fan pressure, low pressure and high pressure functions into one switch. 30lb. low pressure cutoff, 380 lb. high pressure cutoff. 220- lb. fan activation point.

PART #

 DESCRIPTION
24676-VUS Trinary switch

Back